How to remote start Ford Expedition with key fob or mobile device

Ford Expedition supports remote start feature that allows you to remotely start the engine of your vehicle for the purpose of cooling or preheating the interior before the passengers gets to it.

Ford Expedition – (photo by Ford)

The remote start feature on Ford Expedition has many benefits. You can start your vehicle in advance when the weather is too hot or cold outside. The system turns on the air conditioning or heating, making inside cabin temperature more tolerable when you get to your vehicle.


Before you start your Expedition remotely, ensure that the vehicle is parked in a well ventilated area. Starting your vehicle in an enclosed space, like a garage, introduces risk of carbon monoxide poisoning.

Enable remote start in Expedition

Remote start feature must be enabled in the instrument cluster settings of your Ford Expedition before you can use it.

  1. Using the information display controls on the steering wheel, select Settings.
  2. Select Vehicle.
  3. Select Remote Start.
  4. Switch System on or off.

Remote start procedure for Expedition

You can remotely start your Ford Expedition easily by following these simple steps:

  1. Press the lock button on the key fob of your Expedition.
  2. Within three seconds, press the remote start button twice on the key fob.
  3. The turn signal lights flash twice and then the engine starts.
  4. Once started remotely, the engine will run for a maximum of 15 minutes and then shut off.

The parking lamps turn on when the engine is running. The horn sounds if the system fails to start. All other vehicle systems remain off when you have remotely started the engine. The vehicle remains secured when you have remotely started the engine. A valid key must be inside your vehicle to switch the ignition on and drive your vehicle.

Note: You can also use the FordPass app to start the engine.

Remotely stop Expedition’s engine

You can remotely stop the engine of your Expedition by pressing the remote start button once on the key fob. This only works if the engine is running after a remote start.


Note: You can also use the FordPass app to stop the engine.

Extend engine running time

After you have remote started your Ford Expedition, press the lock button on the key fob and then press the remote start button two times with the vehicle still running to extend the run time for another remote start period. If you have the duration set to 15 minutes, the duration extends by another 15 minutes. For example, if the vehicle has run from the first remote start for five minutes, the vehicle continues to run now for a total of 30 minutes. You can extend the remote start up to a maximum of 30 minutes on Expedition.

Remote start system not working on Ford Expedition

If the engine on your Expedition does not start when you perform the remote starting procedure, it can be due to a number of reasons:

  • Your vehicle is low on fuel.
  • The hood on your Expedition is not fully closed.
  • One or more of the vehicle doors are open, make sure they are securely closed.
  • The transmission is not in park mode (P).
  • The 12v battery voltage has gone too low.
  • The service engine light is turned on in the instrument cluster.
  • Your Ford Expedition may not have the remote start feature. Get your vehicle checked by an authorized dealer to confirm if it is equipped with a remote start system.

Remote start remote control indicators

An LED on the remote control of your Expedition provides status feedback of remote start or stop commands.

  • Solid green: Remote start successful.
  • Solid red: Remote stop successful.
  • Blinking red: Request failed or status not received.
  • Blinking green: Status incomplete.

Remote start settings

Switching Climate Control Auto Mode On and Off

  1. Using the information display controls on the steering wheel, select Settings.
  2. Select Vehicle.
  3. Select Remote Start.
  4. Select Climate Control.
  5. Switch Auto on or off.

If you switch the auto mode on, the system attempts to heat or cool the interior of Expedition to 72°F (22°C). When you switch the ignition on, the climate control system returns to the last used settings.

The heated windshield, heated rear window, heated mirrors, heated seats and heated steering wheel could turn on in cold weather

Switching Climate Control Last Settings On and Off

  1. Using the information display controls on the steering wheel, select Settings.
  2. Select Vehicle.
  3. Select Remote Start.
  4. Select Climate Control.
  5. Switch Last settings on or off.

If you switch the last settings on, the system remembers the last used settings.

Switching the Heated Seats and Steering Wheel Settings On and Off (If Equipped)

  1. Using the information display controls on the steering wheel, select Settings.
  2. Select Vehicle.
  3. Select Remote Start.
  4. Select Front Seats & Wheel.
  5. Switch Auto on or off.

If you switch the heated seats and steering wheel settings on, the heated steering wheel in Ford Expedition turns on during cold weather. You cannot adjust the heated seats and steering wheel settings when you have remotely started the engine.


Setting the Remote Start Duration

  1. Using the information display controls on the steering wheel, select Settings.
  2. Select Vehicle.
  3. Select Remote Start.
  4. Select Duration.
  5. Choose 5 Minutes, 10 Minutes or 15 Minutes.

Note: Wait a few seconds before remotely starting the vehicle after the vehicle stops running.

Engine idling law

There are laws against car idling with no passenger or driver inside in many states to protect the environment. It does not mean its completely illegal to use remote start, some states have time limit on how long you can keep the engine running. So check with your local state laws before using the remote start feature on your Ford Expedition.

Video Demonstration

Watch this video to see how to remotely start Ford vehicles.

Remote start Ford Expedition with a mobile device

You can remotely start your Ford Expedition with your Apple or Android mobile device by following these simple steps:

  1. Download FordPass app from Google Play or App Store on your mobile device.
  2. Open the app and accept any terms and conditions that may appear.
  3. Login to your Ford Owner account or create one by pressing the Create Account button.
  4. Add and activate your Ford Expedition in the FordPass app.
  5. Start your vehicle and confirm the prompt to complete the pairing process.
  6. Now press and hold the Start Engine button on the home screen of FordPass app.
  7. The turn signal lights flash twice and the engine starts.
  8. Once started remotely, the engine will run for up to 15 minutes, depending on setting, and then shut off.

Video: Setting up FordPass app

Watch this video to see how to set up FordPass app.
Author: Nabeel K
Email: nabeel@wheelsjoint.com



guest
0 Comments
Inline Feedbacks
View all comments