How to remote start Ford Super Duty (F-250, 350, 450, 550) with key fob or mobile device

Ford Super Duty supports remote start feature that allows you to remotely start the engine of your vehicle for the purpose of cooling or preheating the interior before the passengers gets to it.

Ford Super Duty – (photo by Ford)

The remote start feature on Ford Super Duty has many benefits. You can start your vehicle in advance when the weather is too hot or cold outside. The system turns on the air conditioning or heating, making inside cabin temperature more tolerable when you get to your vehicle.


Before you start your Super Duty remotely, ensure that the vehicle is parked in a well ventilated area. Starting your vehicle in an enclosed space, like a garage, introduces risk of carbon monoxide poisoning.

Enable remote start in Super Duty

  1. Press Settings on the touchscreen.
  2. Press Vehicle Settings.
  3. Press Remote Start Setup.
  4. Switch Remote Start on or off.

Remote start procedure for Super Duty

You can remotely start your Ford Super Duty easily by following these simple steps:

  1. Press the lock button on the key fob of your Super Duty.
  2. Within three seconds, press the remote start button on the key fob.
  3. Within three seconds, press the remote start button again.
  4. The turn signal lights flash twice and then the engine starts.
  5. Once started remotely, the engine will run for a maximum of 15 minutes and then shut off.

The parking lamps turn on when the engine is running. The horn sounds if the system fails to start. All other vehicle systems remain off when you have remotely started the engine. The vehicle remains secured when you have remotely started the engine. A valid key must be inside your vehicle to switch the ignition on and drive your vehicle.

Note: You can also use the FordPass app to start the engine.

Remotely stop Super Duty’s engine

You can remotely stop the engine of your Super Duty by pressing the remote start button on the key fob. This only works if the engine is running after a remote start.

Note: You can also use the FordPass app to stop the engine.


Extend engine running time

When you remotely start the engine of your Super Duty, it will run for a maximum of 15 minutes and then shut off automatically. To extend the engine running duration during remote start, press the lock button on the remote control and then press the remote start button two times within three seconds. You can extend the engine running duration to a maximum of 30 minutes.

Remote start system not working on Ford Super Duty

If the engine on your Super Duty does not start when you perform the remote starting procedure, it can be due to a number of reasons:

  • Your vehicle is low on fuel.
  • The hood on your Super Duty is not fully closed.
  • One or more of the vehicle doors are open, make sure they are securely closed.
  • The transmission is not in park mode (P).
  • The 12v battery voltage has gone too low.
  • The service engine light is turned on in the instrument cluster.
  • Your Ford Super Duty may not have the remote start feature. Get your vehicle checked by an authorized dealer to confirm if it is equipped with a remote start system.

Remote start remote control indicators

An LED on the remote control of your Super Duty provides status feedback of remote start or stop commands.

  • Solid green: Remote start successful.
  • Solid red: Remote stop successful.
  • Blinking red: Request failed or status not received.
  • Blinking green: Status incomplete.

Remote start settings

Switching Climate Control Auto Mode On and Off

  1. Press Settings on the touchscreen.
  2. Select Vehicle.
  3. Press Remote Start Setup.
  4. Press Climate Control.
  5. Switch Auto on or off.

If you switch the auto mode on, the system attempts to heat or cool the interior of Super Duty to 72°F (22°C). When you switch the ignition on, the climate control system returns to the last used settings.

Switching Climate Control Last Settings On and Off

  1. Press Settings on the touchscreen.
  2. Press Vehicle Settings.
  3. Press Remote Start Setup.
  4. Press Climate Control.
  5. Switch Last settings on or off.

If you switch the last settings on, the system remembers the last used settings.

Switching the Heated Seat Settings On and Off (If Equipped)

  1. Press Settings on the touchscreen.
  2. Press Vehicle Settings.
  3. Press Remote Start Setup.
  4. Press Seats.
  5. Switch Auto on or off.

If you switch the heated seat settings on, the heated seats turn on during cold weather in your Super Duty.

Switching the Heated Steering Wheel Settings On and Off (If Equipped)

  1. Press Settings on the touchscreen.
  2. Press Vehicle Settings.
  3. Press Remote Start Setup.
  4. Press Seats and Steering Wheel.
  5. Switch Auto on or off.

If you switch the heated steering wheel settings on, the heated steering wheel turns on during cold weather.

Setting the Remote Start Duration

  1. Press Settings on the touchscreen.
  2. Press Vehicle Settings.
  3. Press Remote Start Setup.
  4. Press Duration.
  5. Choose 5 Minutes, 10 Minutes or 15 Minutes.

Note: Wait a few seconds before remotely starting the vehicle after the vehicle stops running.


Engine idling law

There are laws against car idling with no passenger or driver inside in many states to protect the environment. It does not mean its completely illegal to use remote start, some states have time limit on how long you can keep the engine running. So check with your local state laws before using the remote start feature on your Ford Super Duty.

Video Demonstration

Watch this video to see how to remotely start Ford vehicles.

Remote start Ford Super Duty with a mobile device

You can remotely start your Ford Super Duty with your Apple or Android mobile device by following these simple steps:

  1. Download FordPass app from Google Play or App Store on your mobile device.
  2. Open the app and accept any terms and conditions that may appear.
  3. Login to your Ford Owner account or create one by pressing the Create Account button.
  4. Add and activate your Ford Super Duty in the FordPass app.
  5. Start your vehicle and confirm the prompt to complete the pairing process.
  6. Now press and hold the Start Engine button on the home screen of FordPass app.
  7. The turn signal lights flash twice and the engine starts.
  8. Once started remotely, the engine will run for up to 15 minutes, depending on setting, and then shut off.

Video: Setting up FordPass app

Watch this video to see how to set up FordPass app.
Author: Nabeel K
Email: nabeel@wheelsjoint.com



Subscribe
Notify of
guest

0 Comments
Inline Feedbacks
View all comments