The memory function makes it possible to save a set sitting position (height, inclination, backrest, thigh support) and to call it up again at the push of a button if the seat is in a different position.
In addition to the seat, this function can also be used to adjust the exterior mirrors.
Saving position
To program the driver’s seat and outside mirror positions to a numbered memory button, adjust the driver seat and outside mirrors to the desired positions. Next press the memory SET button and then press the desired programming button 1, 2 or 3 until a beep sounds (newer models have 1 and 2 only). The button is now programmed.
Recalling position
To move the driver’s seat and outside mirrors to the memory position, shift the transmission into the P position. Press the numbered memory button you saved your position to and the position adjustment will begin. Adjustment ends when a beep sounds.
Link memory seat to key fob
- To program the driver’s seat and outside mirror positions to an advanced key, adjust the driver seat and outside mirrors to the desired positions.
- Switch the ignition off.
- Press the memory button and then press the unlock button on the transmitter until a beep sounds. The key is now programmed.
Recall seat position from key fob
To move the driver’s seat and outside mirrors to the programmed position, unlock the driver’s door by pressing a request switch or by pressing the unlock button on the key fob. Open the driver’s door and position adjustment will begin, and the adjustment ends when a beep sounds.
