How to use front camera washer on Ford F-150

Ford F-150 may be equipped with a front camera that can significantly improve your visibility in traffic. But sometimes the camera can get dirty hindering the view. Lets see how we can clean the camera with on-board washer.

Ford F-150 14th generation

Note: Do not operate the washers when the washer reservoir is empty. This could cause the washer pump to overheat. If washer fluid level is low, the system will show a warning in the instrument cluster.


To activate the camera washer, first switch on the front camera in the SYNC 4 infotainment system by pressing the camera button.

Camera button location on 14th gen Ford F-150 – if your vehicle has 360° camera system then keep pressing this button until you see front camera view

With the front camera activated on the touchscreen, press and hold the windshield washer button on the end of the stalk to the left of the steering column.

Washer on/off button

The camera washer nozzle will pop-out from under the Ford logo and spray washer fluid onto the front camera.

Front camera washer in action

Release the button to stop washing the camera.

Which Ford F-150 vehicles have front camera?

Front camera is part of 360-Degree Camera Package, and its a standard feature only on Limited trim. Its an optional feature on XL, XLT, Lariat, King Ranch and Platinum.

Author: Nabeel K
Email: nabeel@wheelsjoint.com



Subscribe
Notify of
guest

0 Comments
Inline Feedbacks
View all comments